High Efficient Tungsten Carbide Pins For Crushing Long Service Life
Tungsten Carbide Pins raw material
-- recycling use
-- sizes & types are available
--good wear resistance
Tungsten Carbide Pins Features:
--100% pure raw material
-- recycling use and environmental
--customized sizes & desigsn are acceptable
--High hardness,good wear resistance, Suitable Low temperature
Tungsten Carbide Pins Application:
1 Mainly used in the cold and wet field tyres climbing boots,skiing
2 for auto-parts:small car,
|Grade||Physical and mechanical properties||Applications recommended|
No Less Than HRA(HV)
No Less Than (Mpa)
|YG3||15.10~15.30||92.5||1700||Superior wear resistance only less than YG3X, sensitive to impact
and vibration, suitable for cast non-ferrous metal and its alloy
finish turning, semi-finish turning, thread finish turning and hole
|YG3X||15.10~15.30||93.6||1450||Best wear resistance in Tungeten and Cobalt alooy, but not good in
anti-impact proprety, suitable for cast iron, non-ferrous and
alloy, quenched steel, alloy steel small cutting section machining
at high speed.|
|YG6||14.80~15.00||91.1||2100||High wear resistance but less than YG3, better anti-impact and
anti-vibration than YG3X, Suitable for cast iron, non-ferrous and
alloy, non-metal material semi-finish machining and finish
|YG6X||14.80~15.00||92.4||2000||Belong to small granule Tungsten carbide alloy, wear resistance
higher than YG6. Suitable for machining cold and hard alloy cast
iron and heat resistance alloy steel, as well as finish machiing
for normal cast iron.|
|YG8||14.6~14.80||90.5||2300||High bending strength resistance, better anti-impact and
anti-vibration than YG6, suitable for cast iron, non-ferrous and
alloy, non-metal material rough machining at low speed.|
tungsten carbide pin through the center of the annular cutter to:
• Help the operator set the precise location to drill
• Guide a steady flow of cutting fluid to he cutting edges
• Eject the slug when the cutter has completed the hole
|Item||Tungsten carbide pins|
|Grade||YG6, YG8, YK05, KK06H, YG8C, ZD15, YG9C, YG10C, YG11C, YG13C,
|Sizes||customized or standard|
|Country of Origin||Zhuzhou, China|
|Usage||bush hammer, safety hammer, round litchi mill|
1.High durability,precision,wear resistance,toughness and
2.Good straightness,the roundness and surface roughness of finish
ground rods are satisfactory
Some Products based on our new designs:
We not only produce the standard types, but also the carbide parts
based on your designs. We have rich experience on this and a big
part of our product is from our clients' designs. We can provide
the technical support, like how to select the right grade of
carbide to match your using purpose, we will make it very easy and
simple to do business with us.
1) 100% quality guarantee
2) Various size for selection
3) Professional technical support
4) OEM & ODM are welcomed
5) Small order is acceptable
6) Factory service with competitive service in the market
7) Delivery in time
8) Flexible payment terms(L/C,T/T,western union, Paypal, etc.)
9) Best after-sale service
about Quality of Products
1.100% virgin raw material .
2.many years production experience in tungsten carbide field.
3.100% inspection before shipment to make sure qualified products
and no more or less than order.
4.Client’s design is welcome.
Why Choose us ?
a.Proffessional cemented carbide manufacturer over 10 years.
b.Located in zhuzhou, A well-known hub for the production of
cemented carbide,We have easy access to a wealth of raw materials.
c.Annual production capacity over 400tons.
d.More than 10000 sets of exisiting non-standard molds,fast
e.Top R&D team and 12-member QC team that follows a five-point
inspection routine,covering raw material,production processes,
semi-finished products, finished products and packaged goods.